产品特点：

Product Features:

六工位零点定位器基础板，标准件的固定间距为100mm/200mm，将六个零点定位器包括固定于六个槽内，并将拉钉固定于工件上，实现零点定位器的快换。重复定位精度＜0.005mm，由于基板安装的零点定位器数量为6，因此一个零点定位器基础板可以达到单个零点定位器六倍的拉紧力。

The six-station zero point locator base plate is designed with standard fixing distances of 100mm/200mm. It incorporates six zero point locators secured within six slots, and by fastening the pull studs to the workpiece, it facilitates the rapid exchange of zero point locators. The repeatability of positioning is less than 0.005mm. Since the base plate is equipped with six zero point locators, a single zero point locator base plate can achieve a clamping force that is six times greater than that of an individual zero point locator.

产品说明：

Product Description:

六工位零点定位器基础板通过基板上的沉头孔锁紧在T型槽上，安装非常简单；

基础板上至少有两个定位孔，以便于安装及加工的时候精准定位。

六工位基础板配有一个定位销以及一个定向销，以及四个锁紧销切勿安装错位置！

The six-station zero point locator base plate is securely fastened to the T-slot table through countersunk holes on the base plate, making the installation process extremely simple.

The base plate features at least two locating holes to ensure precise positioning during installation and machining.

The six-station base plate comes equipped with one locating pin and one orientation pin, as well as four locking pins—be sure not to install them in the wrong positions!